How to set up TG-789 Broadband Gateway for nbn FTTB/N

Please follow the steps below to set up your TG-789 Broadband Gateway.

  1. Plug a phone cable from the telephone wall socket into the grey DSL port on your TG-789.
    TG-789 Step 1
  2. Plug in the power cable and turn your TG-789 on using the Power button.
    TG-789 Step 2
  3. Connect a device to your TG-789 via WiFi or Ethernet cable and go to in your browser.
  4. Log in with your TG-789 username and password. By default, these are printed on the barcode sticker at the bottom of your TG-789.
  5. On the home screen, click Setup Wizard in the top right hand corner.
  6. Select iiNet as the Internet Service Provider.
  7. Select VDSL as the WAN Interface.
  8. Select PPP over Ethernet as WAN Type.
  9. Change VLAN Enabled to On.
  10. Set VLAN ID to 2.
  11. Enter your iiNet username and password.
  12. Select Next and continue with the Wizard in setting up your WiFi.
  13. Select Finish at the end of the Wizard.

Your TG-789 should now be online. If you're still having issues, please see Improving WiFi Signal or call us on 13 22 58 for further assistance.


Appendix - Legacy settings

If you are an existing iiNet customer and the above settings don't work for you, please try these legacy settings:

Internet Service Provider: iiNet
WAN Interface: VDSL
WAN Type: Dynamic IP Address
VLAN Enabled: Off

Was this information helpful?

Why was it not helpful?

Please select an option

Thank you for your feedback.