Set up Home Wireless Broadband

Follow the instructions below to set up your Smart Modem Gateway (VX420-G2H) for Home Wireless Broadband.

Note: If you have an old modem that you don't want to keep, please consider eWaste recycling facilities that may be offered by your local council.

 

First, ensure you have:

  • A message from us advising you to plug in your modem.
  • An available electrical outlet.
  • Unplugged your old broadband modem.

Choose a good spot for your modem:

  • A clear, elevated space near a window is ideal.
  • Avoid direct sunlight as this can cause your modem to overheat.
  • Placing the modem on the floor or in a cupboard may cause a weak signal.
  • You don’t have to use the same spot as your old modem for NBN or other broadband services.
  • You can try different spots if your first spot isn’t giving you a strong signal.
  1. Your iiNet Micro SIM has already been inserted for your convenience. Please do not remove the SIM.
  2. Use the supplied power cable to connect the modem’s POWER port to an available power outlet, then turn the modem on using the ON/OFF button.
    Home Wireless Broadband setup diagram
  3. Wait approximately 3 minutes for the modem’s Power, 4G, Internet and 2.4GHz/5GHz WiFi lights to turn on and settle.
    Home Wireless Gateway LED diagram
  4. If the 4G light is red, move your modem to another location, ideally near a window and away from direct sunlight.
  5. You can use an additional Ethernet cable to connect a computer to any of the 4 LAN ports.
  6. If you wish to connect your devices via WiFi, you'll find the WiFi name (SSID) and password on the barcode sticker on the base of your modem.
    Home Wireless Gateway barcode sticker - WiFi details

Your modem will automatically connect your devices to the best WiFi network possible (i.e. 5GHz). Older devices may only be able to connect to the slower 2.4GHz WiFi. See Improving WiFi Signal.

 


Was this information helpful?

Why was it not helpful?

Please select an option





Thank you for your feedback.