How to set up D-Link COVR-1102 for nbn FTTP

Please follow the steps below to set up your D-Link COVR-1102.

  1. Ensure your nbn Connection Box is turned on.
  2. Plug an Ethernet cable from the UNI-D1 port on your nbn Connection Box into the Internet port on your D-Link router.
    Note: if UNI-D1 doesn't work, try each UNI-D port.
    D-Link COVR-1102 Internet port
  3. Plug in the power cable and turn your COVR-1102 on using the Power button.
    D-Link COVR-1102 power button
  4. Connect a device to your COVR-1102 via WiFi or Ethernet cable and go to http://covr.local or in your browser.
  5. Click Go to Settings and Internet.
  6. Select PPPoE from My Internet Connection is.
  7. Enter your iiNet username and password.
  8. Select Save.
  9. If your nbn plan was activated before 1 March 2023 or you have nbn Phone included in your service, more settings are needed:
    - Click VLAN option from Internet Settings.
    - Enable Triple Play Status and Priority ID.
    - Enter 2 in Internet VLAN ID and 0 in Priority ID.
  10. Click Save at the end of the Wizard.

Your D-Link COVR-1102 should now be online. If you're still having issues, please see Improving WiFi Signal or call us on 13 22 58 for further assistance.

Was this information helpful?

Why was it not helpful?

Please select an option

Thank you for your feedback.