How to set up Netgear Nighthawk RAX120 for NBN FTTC

Please follow the steps below to set up your Netgear Nighthawk RAX120.

  1. Ensure your NBN Connection Device is turned on.
  2. Plug an Ethernet cable from the yellow Gateway port on your NBN Connection Device into the Internet/WAN port on your Nighthawk router.
    Netgear Nighthawk RAX120 Internet/WAN port
  3. Plug in the power cable and turn your Nighthawk on using the Power button.
    Netgear Nighthawk RAX120 Power port
  4. Connect a device to your Nighthawk via WiFi or Ethernet cable and go to or in your browser.
  5. Log in with your Nighthawk username and password. By defaults these are:
    Username: admin
    Password: password
  6. Select Internet Port for WAN Preference.
  7. Select PPPoE (PPP over Ethernet) from the Encapsulation drop down.
  8. Enter your iiNet username and password.
  9. Click Apply.
  10. Select AdvancedAdvanced Setup and VLAN/Bridge Settings.
  11. Enable VLAN/Bridge Setup check box. 
  12. Select By VLAN tag group
  13. Click Add.
  14. Enter a Name for the VLAN (e.g. "Internet").
  15. Enter 2 in VLAN ID.
  16. Enter 0 in Priority and Add.
  17. Click Apply.

Your Netgear Nighthawk RAX120 should now be online. If you're still having issues, please see Improving WiFi Signal or call us on 13 22 58 for further assistance.

Was this information helpful?

Why was it not helpful?

Please select an option

Thank you for your feedback.