How to set up ASUS AC1200 for nbn FTTP

Please follow the steps below to set up your ASUS AC1200.

  1. Ensure your nbn Connection Box is turned on.
  2. Plug an Ethernet cable from from the UNI-D1 port on your nbn Connection Box into the blue WAN port on your ASUS modem.
    Note: If UNI-D1 doesn’t work, try each UNI-D port
    ASUS AC1200 WAN Port
  3. Plug in the power cable and turn your ASUS router on using the Power button.
    ASUS AC1200 Power Port+ Switch
  4. >Connect your computer or any device to your modem by plugging an Ethernet cable from the device to the Ethernet port, or you can connect your device via Wi-Fi.
    ASUS AC1200 LAN Ports
  5. Go to or enter in your browser.
  6. Log in with your ASUS username and password. By default these are:
    Username: admin
    Password: admin
    Note: If you have the QIS page, just click on Skip Setup Wizard to manually configure your connection settings.
  7. Under Advance Settings, click on WAN.
  8. Go to the Internet Connection tab and select PPPoE for your WAN connection type.
  9. Enter your iiNet Username and Password.
  10. Select Apply.
  11. Select Advanced Settings > LAN > IPTV.
  12. Set the ISP Profile to Manual.
  13. If your nbn plan was activated before 1 March 2023 or you have nbn Phone included in your service, more settings are needed. Set Internet VID to 2 and PRI to 0.
  14. Select Apply.

Your ASUS AC1200 should now be online. If you're still having issues, please see Improving WiFi Signal or call us on 13 22 58 for further assistance.

Was this information helpful?

Why was it not helpful?

Please select an option

Thank you for your feedback.