Troubleshoot slow Opticomm FTTH
If your iiNet Fibre to the Home (FTTH) service on the Opticomm or RedTrain network is running slowly, these steps will help you identify the issue.
- Your service may just be affected by planned maintenance. You can check your address on our Network Status page.
If there is planned maintenance, the results will give you an estimated fix time. - Find your FTTH Connection Box – this is usually installed on the inside of an exterior wall in your home, sometimes in the garage. Your modem will be plugged in to this Connection Box via Ethernet cable.
- Using the power button or power outlet, turn off both your modem and the Connection Box for at least 10 seconds.
- Turn both devices back on and wait for your modem's Internet light to come on, then run a speed test.
- Do you have any devices connected to your modem with an Ethernet cable? If speeds on these devices are fine but devices on Wi-Fi are slow, switch to Troubleshooting Wi-Fi speed.
- Make sure your modem’s Ethernet cables are in good condition, with “CAT6” or “CAT5e” printed on them.
Older CAT5 Ethernet cables are not recommended for FTTH services. You’ll need to replace any broken or chewed cables. - Your speed may temporarily slow down if you’re running more devices or apps than your connection can handle at the same time. For example, if a device is downloading a large file or running a 4K streaming app, your speed should improve when it’s finished.
If you need to run more devices or apps at the same time, you can change your plan in Toolbox or call us on 13 19 17 for support. - Run a scan on your antivirus/anti-malware software. If any infections are detected, make sure they are quarantined and removed.
Contact your software’s Customer Support if you need help. - Still getting slow speeds? Please call us on 13 22 58 and we'll help you.