Set up BYO modems on nbn® Wireless

Here’s how you can set up a compatible bring-your-own (BYO) modem for iiNet nbn Wireless.

Your nbn Phone service and included calls are not available if you use a BYO modem.

Select one of the links below to jump to a query:

Modem compatibility

To work on iiNet nbn Wireless, your modem must:

  • Be nbn-ready and able to support your nbn plan speed
  • Support PPPoE connections by Ethernet WAN
  • Allow VLAN settings to be changed

For a list of modems tested by our team, see nbn BYO modem requirements.

 

General nbn® Wireless setup guide for any modem

All modems are different. If this advice doesn’t work for your modem, check the manufacturer’s website for a guide on how to plug in and enter the iiNet settings.

  1. Find your nbn Connection Box (NCB) – this is usually installed on the inside of an exterior wall in your home, sometimes in the garage. Unplug any old modem from the nbn Connection Box and power outlet.
  2. Use an Ethernet cable to connect your modem's WAN or LAN/WAN port to your NCB's UNI-D1 port.
    Our email/SMS will tell you if you need to use a different UNI-D port.
  3. Use the power cable to connect your modem's Power port to a power outlet, then turn it on.
    If your modem has a power button or switch, turn it on.
    nbn Wireless plugin example diagram
  4. Connect a device to your modem. You can use an Ethernet cable to connect a device to one of the LAN or Ethernet ports, or connect via WiFi.
    The default WiFi name (SSID) and password can be found on your modem’s barcode sticker.
    Barcode sticker example - WiFi details
  5. On your connected device, open your web browser and go to your modem’s gateway address (e.g. http://192.168.1.1). The gateway address and login details can be found on the barcode sticker
    Modems may have a login username and password, or just a password.
    Barcode sticker example - Admin login details
  6. Make sure your modem has the following settings. If you’re not sure how to do this, check the manufacturer’s website for a guide.
     
    Mode/Modulation: WAN
    Connection Type: PPPoE
    VLAN: On or enabled
    VLAN Tagging: On or enabled
    VLAN ID: 2
     
  7. You’ll need to enter your iiNet username and password for the PPPoE connection. Your username is in emails from us about your iiNet order, and on your iiNet  invoice.
    If you forgot your password, you can reset it.
  8. Save your settings and wait 5-10 minutes for your modem to connect.
  9. You should now be online. If you can’t view a website or notice a red or unlit Internet light on your modem, call us on 13 22 58 for help.
    We’re fully trained on iiNet modems, but please note that there may be limited support for your BYO modem.
    Modem LED example - Internet light

 

nbn® Wireless setup guides for popular modems

The make and model of your modem can be found on its barcode sticker.

Choose your modem:

Can't find your modem? Check the manufacturer's website for a setup guide on how to plug in and enter the iiNet Broadband Settings.


Was this information helpful?

Why was it not helpful?

Please select an option





Thank you for your feedback.