Set up BYO modems on FTTH

Here’s how you can set up a compatible bring-your-own (BYO) modem for iiNet FTTH on the Opticomm or RedTrain network.

Your Netphone service and included calls are not available if you use a BYO modem.

Select one of the links below to jump to a query:

Modem compatibility
General FTTH setup guide for any modem
FTTH Connection Box examples

ALLOPTIC home 4000
NEC ME200
Huawei HG8247
Dasan H690R

Modem compatibility

To work on iiNet FTTH, your modem must support the following:

PPPoE connections by Ethernet WAN
IPoE connections by Ethernet WAN (for select locations on the RedTrain network)

Not sure if your FTTH service is on the Opticomm or RedTrain network? Call us on 13 22 58 and we'll help you.

General FTTH setup guide for any modem

All modems are different. If this advice doesn’t work for your modem, check the manufacturer’s website for a guide on how to plug in and enter the iiNet settings.

Find your FTTH Connection Box – this is usually installed on the inside of an exterior wall in your home, sometimes in the garage. Some older installations may be in a cabinet on an outside wall. Unplug any old modem from the Connection Box and power outlet.
Examples of connection boxes can be found here.
Use an Ethernet cable to connect your modem's WAN or LAN/WAN port to the LAN1 or Ethernet 1 port on your Connection Box.
Use the power cable to connect your modem's Power port to a power outlet, then turn it on.
If your modem has a power button or switch, turn it on.
Connect a device to your modem. You can use an Ethernet cable to connect a device to one of the LAN or Ethernet ports, or connect via WiFi.
The default WiFi name (SSID) and password can be found on your modem’s barcode sticker.
On your connected device, open your web browser and go to your modem’s gateway address (e.g. http://192.168.1.1). The gateway address and login details can be found on the barcode sticker
Modems may have a login username and password, or just a password.
Make sure your modem has the following settings. If you’re not sure how to do this, check the manufacturer’s website for a guide.

Mode/Modulation: WAN
Connection Type: PPPoE*

*Select locations on the RedTrain network need to use IPoE. If you're not sure if this applies to you, call us on 13 22 58 and we'll help you.
You’ll need to enter your iiNet username and password for the PPPoE connection. Your username is in emails from us about your iiNet order, and on your iiNet invoice.
If you forgot your password, you can reset it.
Save your settings and wait 5-10 minutes for your modem to connect.
You should now be online. If you can’t view a website or notice a red or unlit Internet light on your modem, call us on 13 22 58 for help.
We’re fully trained on iiNet modems, but please note that there may be limited support for your BYO modem.