How to set up FRITZ! Box 7490 for nbn FTTC

Please follow the steps below to set up your FRITZ!Box 7490.

1. Ensure your nbn Connection Device is turned on.
2. Plug an Ethernet cable from the yellow Gateway port on your nbn Connection Device into the LAN 1 port on your FRITZ!Box.
   
3. Using the supplied power cable, connect the FRITZ!Box's Power port to an electrical outlet and turn it on.
   
4. Connect a device to your FRITZ!Box via WiFi or Ethernet cable and go to http://192.168.178.1 in your browser.
5. Log in with your FRITZ!Box password. By default the password can be either admin or admin123.
6. On the home screen, click Internet.
7. Click Account Information.
8. Select Other Internet service provider from the Internet service provider drop down.
9. Enter iiNet.
10. Tick the box next to External modem or router.
11. Tick the box next to Establish own connection to the Internet.
12. Tick the box next to Yes for Account Information.
13. Enter your iiNet Username and Password.
14. Enter the Downstream and Upstream speeds of your nbn plan as per the following:

    Service speed	Downstream (Mbps)	Upstream (Mbps)	Downstream (kbps)	Upstream (kbps)
    NBN12	12	1	12000	1000
    NBN25	25	5	25000	5000
    NBN50	50	20	50000	20000
    NBN100	100	20*	100000	20000*

    *Note: Business NBN100 plans and some legacy residential NBN100 plans may require a maximum of 40Mbps or 40000kbps instead.
15. Click Change connection settings.
16. Tick the checkbox next to Maintain permanently (recommended for flat rates). 
17. If your nbn plan was activated before 1 March 2023 or you have nbn Phone included in your service, more settings are needed. Tick the checkbox next to Use VLAN for internet access and enter 2 for VLAN-ID.
18. Click Apply.
     

Your FRITZ!Box should now be online. If you're still having issues, please see Improving WiFi Signal or call us on 13 22 58 for further assistance.