How to set up D-Link DSL-G225 for NBN FTTC

Please follow the steps below to set up your D-Link DSL-G225.

  1. Ensure your NBN Connection Device is turned on.
  2. Plug an Ethernet cable from the yellow Gateway port on your NBN Connection Device into the red WAN port on your D-Link router.
    D-Link DSL G225 Step 1
  3. Plug in the power cable and turn your DSL-G225 on using the Power button.
    D-Link DSL G225 Step 2
  4. Connect a device to your DSL-G225 via WiFi or Ethernet cable and go to http://192.168.1.1 in your browser.
  5. Log in with your D-Link username and password.

    By default these are:
    Username: admin
    Password: admin
  6. On the home screen, select Setup Wizard.
  7. Complete Step 1 Change Device Login Password and make note of the new password.
  8. Complete Step 2 Set Time and Date for your location.
  9. Select ETH WAN as the WAN Service Type.
  10. Select Australia from the Country drop down.
  11. Select Others from the Internet Service Provider drop down.
  12. Select PPPoE from the Protocol drop down.
  13. Enter your iiNet username and password.
  14. Select Enable Multiple VLAN over One Connection by checking the box.
  15. Enter 0 in the 802.1P Priority (0-7) option.
  16. Enter 2 in the 802.1Q VLAN ID option.
  17. Select Next and continue with the Wizard in setting up your WiFi.
  18. Select Save/Apply at the end of the Wizard.
     

Your D-Link DSL-G225 should now be online. If you're still having issues, please see Improving WiFi Signal or call us on 13 22 58 for further assistance.