How to set up Netcomm NF4V for NBN FTTP
Please follow the steps below to set up your Netcomm NF4V.
- Ensure your NBN® Connection Box is turned on.
- Plug an Ethernet cable from the UNI-D1 port on your NBN Connection Box into the yellow WAN port on your Netcomm router.
- Plug in the power cable and turn your Netcomm on using the Power button on the side.
- Connect a device to your NF4V via WiFi or Ethernet cable and go to http://192.168.20.1 in your browser.
- Log in with your Netcomm username and password. By default these are:
- Select Basic Setup.
- Select Ethernet WAN then click Next.
- Select PPPoE over Ethernet (PPPoE) then click Next.
- If your NBN plan was activated before 1 March 2023 or you have NBN Phone included in your service, more settings are needed. Select Customer VLAN Tag and enter 2.
- Enter in your iiNet username and password.
- Click Finish.
Your Netcomm NF4V should now be online. If you're still having issues, please see Improving WiFi Signal or call us on 13 22 58 for further assistance.