How to set up D-Link Exo AC1900 for nbn Wireless
Please follow the steps below to set up your D-Link Exo AC1900 Smart Mesh Wi-Fi Router.
- Ensure your nbn Connection Box is turned on.
- Plug an Ethernet cable from the UNI-D1 port on your nbn Connection Box into the yellow Internet port on your D-Link router.
Note: If UNI-D 1 doesn't work, try each UNI-D port.
- Plug in the power cable and turn your D-Link Exo AC1900 on using the Power button.
- Connect your computer or any device to your modem by plugging an Ethernet cable from the device to the Ethernet port, or you can connect your device via Wi-Fi.
- Go to:192.168.1.1 or http://dlinkrouter.local in your browser.
- Enter your D-Link password (if this was not changed, by default the password field is left blank).
- Select Settings then Internet.
- Select PPPoE in the My Internet Connection is: drop down.
- Enter your iiNet Username and Password.
- Click Save.
- If your nbn plan was activated before 1 March 2023 or you have nbn Phone included in your service, more settings are needed:
- In Internet Settings, select VLAN and toggle Status to ON.
- Change the Internet VLAN ID to 2 and enter 0 (zero) in the Priority ID field.
- Click Save.
Your D-Link Exo AC1900 should now be online. If you're still having issues, please see Improving WiFi Signal or call us on 13 22 58 for further assistance.