How to set up D-Link AC1750 for nbn Wireless

Please follow the steps below to set up your D-Link AC1750 Gigabit Wi-Fi Router.

  1. Ensure your nbn Connection Box is turned on.
  2. Plug an Ethernet cable from the UNI-D1 port on your nbn Connection Box into the Internet port on your D-Link router.
    Note: if UNI-D1 doesn't work, try each UNI-D port.
    D-Link AC1750 Internet Port
  3. Plug in the power cable and turn your D-Link router on using the Power button.
    D-Link AC1750 Power Port
  4. Connect your computer or any device to your modem by plugging an Ethernet cable from the device to the Ethernet port, or you can connect your device via Wi-Fi.
    D-Link AC1750 LAN Ports
  5. Go to 192.168.1.1 or http://dlinkrouter.local in your browser.
  6. Enter your D-Link password (if this was not changed, the default password is printed on the label found on the back of your modem or in the modem's Quick Start Guide). 
    Note: You may have to agree to the Terms of Use and Privacy Policy before proceeding.
  7. Click Settings then Internet.
  8. From My Internet Connection is, select PPPoE.
  9. Enter your iiNet Username and password.
  10. Select Save.
  11. If your nbn plan was activated before 1 March 2023 or you have nbn Phone included in your service, more settings are needed:
    - From Settings, select Internet, then VLAN.
    - Set Triple-play and VOIP VLAN to Enabled.
    - Change the Internet VLAN ID: 2 and Priority ID: 0.
    - Click Save.

Your D-Link AC1750 Gigabit Wi-Fi Router should now be online. If you're still having issues, please see Improving WiFi Signal or call us on 13 22 58 for further assistance.


Was this information helpful?

Why was it not helpful?

Please select an option





Thank you for your feedback.